CURIX 60

CURIX 60 is a tabletop processor low-volume radiology or as a backup processor.

Can be used with following products and services

Agfa chemicals are recommended.

Suitable for following market segments

Low-volume processing or back-up purposes.

Availability

Worldwide, except for the US and Canada.

Superior performance

With its infrared dryer, the CURIX 60 offers superior drying performance with low power consumption and a low noise level. To ensure consistently high-quality images, the bath temperature is controlled electronically.

Compact and time-saving

Due to the clever positioning of the replenisher tanks and film delivery slot, and to the boomerang system that transfers the processed film to the top of the processor, the footprint is small and access easy. The exclusive CURIX 60 light-tight cover design means you don't need to wait until the film has completely entered the processor; you can leave the darkroom after just 15 seconds.

Pleasant work environment

Both the chemical tanks and the rollers are covered, so the work environment is not disturbed by chemical fumes.

Optimized replenishment

Generally, the flow of replenishment is controlled by scanning the film surface. When the CURIX 60 is used at irregular intervals, 50% of the contents in the developing tray can be replaced by simply pressing the 'Optimizing key'.

Optimum replenishment

On the whole, the flow of replenishment is controlled by scanning the film surface. When the CURIX 60 is used at irregular intervals, half the contents of the developing tray can be replaced by simply pressing the 'Optimising key', i.e. the black key in the middle.

Dimensions (l x w x h)

80 x 65 x 38 cm (31.5 x 25.5 x 15 in)

Note: length with feeder tray is 94 cm (37 in)

Weight

Empty: 60 kg (132 lbs)

With replenisher bottles: 69 kg (152 lbs)

Tray capacity

Developer tank: 0.9 l (0.2 gal)

Fixer tank: 0.9 l

Wash tank: 0.9 l

Replenisher bottles: 2.5 l (0.7 gal)

Capacity

60 films/hour

Processing cycle

3 min

Film sizes

Min. size: 10 x 10 cm (diagonally)

Max. width: 36 cm

Film transport speed

28.5 cm/min

Drying system

Infrared

Standard equipment

Processor + set of 3 replenisher bottles

Accessories

Water supply connection

Light-tight cover

Processor stand

Set of three replenisher bottles of 2.5 l (3 x 0.66 gal)

Automatic stand-by mode

'Optimising key' for replenishment

Power supply

50 Hz, 230 V, 1500 W max.

50 Hz, 200 V, 1500 W max.

60 Hz, 100 V, 1500 W max.

Warming-up time

7 min

Safety

This processor complies with the VDE, UL and CSA safety regulations and with the VDE regulations on radio interference suppression. The nonreturn water connection complies with the DIN standard for connection to drinking water systems of the DVGW. The unit is supplied with the GS label.